Daikin ceiling mounted air conditioning FCF71CVM inverter (3.0Hp) - 3 phases Gas R32

Inverter one-way

Specially designed for shops, restaurants, and small offices, the SkyAir inverter series meets all customer needs thanks to a diversity of indoor units and power supplies.

• Inverter technology.
• Diverse indoor units.
• Outdoor heat sink fins are treating against corrosion.
• Easy-to-use remote navigation control, Weekly Schedule feature.

Ceiling mounted cassette indoor unit (Round flow)

The new standard from the Cassette indoor unit blows the air at 360 degrees:

• Avoid uneven temperature and draft discomfort.
• The blowing direction distributes the temperature evenly.
• It is easy to adapt to any facility.
• Compact design, quiet operation.
• Easy and quick installation.
• Easy to maintain.
• Unified square panels for all capacities ensures aesthetics when multiple devices are installing in the same space.

The new standard from Cassette indoor units blows 360 ° uniform air

Avoid uneven temperature and draft discomfort.

Boost your pleasure with the omnidirectional wind blowing!

Quick and Easy Installation

Air flows out from corner outlets, comfort spreads more widely.

Note: One-panel style is using for all blow styles. If the Air Intake Shield (optional accessory) can protect the unused vents, any versions other than omnidirectional flow are mounted.

The outer panel is coating with anti-dust

Bacteriaproof covering and dust: encourage brushing. 

The exterior panel was painted on the top with an anti-dust film to prevent trapping dust. 

Pan of the drain to silver ion. The antimicrobial mechanism uses silver ions to deter mold formation, bacteria creating disagreeable fumes, and block drainages in the drainage pan.

The flap has no antibacterial edge. Avoid condensation, preventing dirt from sticking to the flaps. Easy to clean.

Filter against mold and bacteria. Prevent mold and bacteria produced from dust and moisture that can get on the filter.

Unified square panels

Panel size is the same for all models, FCQ50-140KA. It is easy to maintain a neat appearance when multiple units are installed in the same room.

Compact design and quiet operation

Optimal comfort and convenience assured by 2 air discharge modes

Suitable for high ceilings

When all round flow is selected, ceilings up to 4.2 m in height can be accommodated. (100-140C)

Even in spaces with high ceilings, a comfortable airflow is carried down to the floor level.

Criteria for ceiling height and number of air discharge outlets (Ceiling height is reference value)

 

Note: Factory setting for standard ceiling height and 360^o airflow The settings for high-level ceilings (1) and (2) are set in place using the remote control.

High CSPF inverter technology

Thanks to the combination of energy-saving technologies, the product's CSPF achieves between 4.85 and 6.47.

Compact outdoor unit, save space

The latest outdoor unit is more compact, with just 990mm in height than the previous non-inverter edition. Easy to deploy and sustain high CSPF energy-saving efficiency in confined spaces.

Outdoor heat sink fins are treating against corrosion

The heat exchanger corrosion-treated (acrylic pretreated) is used to increase reliability by increasing resistance to salt corrosion and air emissions for the outdoor heat exchanger.

Easy-to-use remote navigation control with Weekly Schedule feature

Ability to quickly cool and dehumidify the air: New inverter technology gives comfort more quickly (One-way cooling)

Quick cooling function: Quickly and easily make space comfortable before the arrival of office workers or shop customers. As well as quick cooling at maximum capacity, new inverter control rapidly removes indoor humidity. More than simple temperature reduction, this twin reduction provides greater comfort (within a maximum of 30 minutes).

Why is inverter technology economical?

Inverter system consumes less electricity, and soon recovers the difference in initial cost. This results in lower total cost. 

Inverter air conditioner can adjust its cooling capacity according to the cooling load. This results in less power consumption.

In response to fluctuating cooling load, Non inverter air conditioners repeatedly perform ON (full-power) / OFF (zero-power) operation. Inverter air conditioners, however, operate at optimal cooling capacity according to the cooling load. Since inverter air conditioners provide required minimum cooling capacity with minimum electrical power, total power consumption can be reduced during cooling period.

Inverters operate without repeated ON/OFF operation.

Why is inverter technology more comfortable?

When temperature does not fluctuate much, the set temperature is maintained. Inverter control responds to load changes and causes minor temperature adjustments. Non-inverter control frequently turns ON and OFF in response to load fluctuations or load mismatch and causes large temperature swings.

Other convenient functions: Better still,... Advanced Daikin inverter technology brings many different benefits to customers and installers.

Automatic protection against low voltage: In AM and PM peak electricity consumption periods, supply may fluctuate. Built-in low-voltage protection will automatically cut operations. When normal voltage is restored, operation will resume as before.

Coated printed circuit boards: Coated circuit boards prevent problems caused by humidity and airborne dust. It also protects against salt contained in sea breezes. Both sides of the PCB in outdoor units are coated.

Self-diagnosis functions enable prompt maintenance response: An error message appears on the LCD of the remote controller and an LED lights up on the unit. When the BRC1E62 is installed, the error code appears showing contact information and model name. Contact your Daikin dealer and provide the error code and model name.

The BRC1E62 remote controller includes convenient functions

Setpoint auto reset

- Even if the set temperature is changed, the new set temperature returns to the previous preset value after a preset duration of time.

- Period selectable from 30, 60, 90, or 120 min.

Setpoint range set

- Saves energy by limiting the min. and max. set temperature.

- Avoids excessive heating or cooling.

- This function is convenient if the remote controller is installed where anyone can change the settings.

Night quiet operation mode

Consideration is given for people living nearby. Outdoor unit operating sound can be reduced.

Technology

Advanced technology, including the use of corrosion resistant electronic expansion valves, acid neutralisers and improved compressor reliability, enables the re-use of existing piping* without the need of pipe flushing for a simplified replacement process.

Note: 

1. Rated cooling capacities are base on the following conditions: Room temperature 27 ° CDB, 19 ° CWB; outdoor temperature 35 ° CDB, 24 ° CWB; 7.5 m equivalent refrigerant piping (horizontal) 
2. Capacity is net value, including the deduction of heat from an indoor engine. 
3. Value converted under anechoic chamber conditions. If measured under actual installation conditions, the actual value is usually higher than the specification due to ambient noise and acoustical echo.

BACKGROUND DAIKIN SKYAIR INVERTER SAVE ELECTRICITY FOR BUSINESS

Dimensions

Specifications

 

Note: 

1. Rated cooling capacities are base on the following conditions: Room temperature 27 ° CDB, 19 ° CWB; outdoor temperature 35 ° CDB, 24 ° CWB; 7.5 m equivalent refrigerant piping (horizontal) 
2. Capacity is net value, including the deduction of heat from an indoor engine. 
3. Value converted under anechoic chamber conditions. If measured under actual installation conditions, the actual value is usually higher than the specification due to ambient noise and acoustical echo.