General information | |
---|---|
Origin | Brand : Japan - Manufacture of : Thailand |
Gas | R-32 |
Type | Inverter (save energy) |
Cooling capacity | 2.0 HP ~ 18.000 Btu/h |
Using for rooms | Area 24 - 30 m² or 72 - 90 m³ (suitable for bedroom) |
Power source (Ph/V/Hz) | 1 Phase 220 - 240 V 50Hz |
Electricity consumption | 1.20 kW |
Refrigerant/ Liquid Pipe Diameter (mm) | 9.5 / 15.9 |
Maximum Pipe Length (m) | 50 m |
Maximum Elevation Length (m) | 30 m |
Cooling Seasonal Performance Factor (CSPF) | 6.30 |
In door unit | |
Model Name | FHA50BVMV |
Dimensions (H x W x D) (mm) | 235 x 960 x 690 mm |
Weight (Mass) (Kg) | 25 kg |
Outdoor Unit | |
Model Name | RZF50CV2V |
Dimensions (H x W x D) (mm) | 595 x 845 x 300 mm |
Weight (Mass) (Kg) | 41 kg |
Stylish Model of Daikin FHA50BVMV / RZF50CV2V
Sophisticated design
The latest model is a modern style and luxury white color. Flap neatly closes when not in use.
Comfort
The technology of the DC fan motor, wide sirocco fan, and large heat exchanger combine for greater airflow and quiet operation.
Auto swing (up and down) and louvers (left and right by hand) bring comfort to the room.
Louver manually adjusts for straight or wide angle airflow.
Suitable for high ceilings.
Daikin ceiling suspended air conditioning FHA50BVMV inverter (2.0Hp) - Gas R32 can install in any position with the allowable ceiling height of up to 3.5 m.
Note: Factory settings is “standard”. “High ceiling” are set with remote controller by field setting.
Switchable fan speed: 5 steps and Auto: Control of airflow rate has been improved from 3-step to 5-step. Auto airflow rate is newly available.
Quite operation
Oil Resistant Grille
Oil-resistant plastic is used for the air suction grille
This satisfies durability in restaurants and other similar environments.
Note: Intended for use in salons, dining rooms, and ordinary sales floors, this specification is not suitable for kitchens or other harsh environments.
Easy Maintenance
Drain pump kit (option) includes a silver ion antibacterial agent
That assists in preventing the growth of slime, bacteria, and mould that cause odours and clogging.
Non-flocking flap
Condensation does not easily form and dirt does not cling to non-flocking flap. It is easy to clean.
Easy-clean, flat surfaces
It is easy to wipe dirt off the flat side and lower surfaces of the unit.
Installation Flexibility for Freedom of Design
Flexible installation: The unit fits more snugly into tight spaces.
Drain pump kit (option) can be easily incorporated: Drain pipe connection can be done inside the unit. Refrigerant and drain pipe outlets are at the same opening.
DIII-NET communication standard: Connection to a centralised control system is available without need for an optional adaptor.
All wiring and internal servicing can be done from under the unit.
Easier piping work for rear side by removable frame.
Specifications
Note:
- Rated cooling capacities are base on the following conditions: Room temperature 27 ° CDB, 19 ° CWB; outdoor temperature 35 ° CDB, 24 ° CWB; 7.5 m equivalent refrigerant piping (horizontal)
- Capacity is net value, including the deduction of heat from an indoor engine.
- Value converted under anechoic chamber conditions. If measured under actual installation conditions, the actual value is usually higher than the specification due to ambient noise and acoustical echo.