General information | |
---|---|
Origin | Brand : Japan - Manufacture of : Thailand |
Gas | R-32 |
Type | Inverter (save energy) |
Cooling capacity | 3.0 Hp ~ 25.600 Btu/h |
Using for rooms | Area 36 - 40 m² or 108 - 120 m³ (suitable for living room, office) |
Power source (Ph/V/Hz) | 1 Phase 220 - 240 V 50Hz |
Refrigerant/ Liquid Pipe Diameter (mm) | 6.35 / 15.88 |
Dimensions (C x R x S) | 200 x 1100 x 620 (mm) |
Weigh | 30 (Kg) |
Daikin Multi NX duct connected indoor unit CDXM71RVMV inverter (3.0Hp) Gas R32 with low static pressure. This unit combines with both 1 & 2-way multi-unit outdoor unit, model 2018 station R32. Power 7.1kW combine with 1-way outdoor unit models 4MKM80RMVM, 5MKM100RMVM, and 2-way 4MXM80RMVM, 5MXM100RMVM. CDXM71 indoor unit is slim and compact, width 1100m, height 200m, suitable for installation in narrow ceilings with a depth of only 240mm. It is the model with the highest capacity in the standard low-static pressure duct-connected ceiling-mounted indoor unit. If you need a lower capacity indoor unit, please refer to Daikin's multi-air conditioner catalog.
Functions of the wireless remote controller for Daikin Multi NX duct connected indoor unit CDXM71RVMV inverter (3.0Hp) Gas R32
- The fan speed of the CDXM71 indoor unit is set to suit the needs of users.
The circuit processor automatically controls fan speed to adjust the room temperature to the set temperature.
CDXM71RVMV indoor unit model works smoothly.
- The outdoor unit operates smoothly.
- The set temperature can be increased or decreased by + -5oC for added operator comfort.
- Automatic operation selects cooling or heating mode based on room temperature at start-up. This function is only available for control for the BRC086A11 refrigerated 2-way system.
- Pre-humidification (heating mode) feature is only available for the BRC086A11 2-way system controller.
Combines dehumidification and dry cooling operation using a low-speed cold air stream, resulting in lower room temperatures with low humidity.
- Only the indoor fan runs while the compressor will stop cooling.
- The quick cooling function is convenient for fast cooling/heating within 20 minutes when you turn on the machine and when you want to change the room temperature quickly.
- Econo power-saving mode will minimize the starting current and power consumption of the outdoor unit to avoid damage to the circuit board due to an overload phenomenon.
- On / Off button on CDXM71RVMV indoor unit.
- Notice of receiving a signal.
- Backlight on the remote.
- Air filter.
- Timer On / Off 24h.
Automatic on/off timer.
- DIII-net control (optional).
- Automatically restart when power failure.
- Self-diagnostic error.