| General information | |
|---|---|
| Origin | Brand : Japan - Manufacture of : Thailand |
| Gas | R-410A |
| Type | Non-Inverter Air Conditioner (Mono) |
| Cooling capacity | 5.5 Hp ~ 47.800 Btu/h |
| Using for rooms | Area 77 - 80 m² or 231 - 240 m³ (suitable for living room, office) |
| Power source (Ph/V/Hz) | 3 Phase 380 V 50Hz |
| Electricity consumption | 4.5 kW |
| Refrigerant/ Liquid Pipe Diameter (mm) | 9.52 / 15.88 |
| Maximum Pipe Length (m) | 50 m |
| Maximum Elevation Length (m) | 30 m |
| In door unit | |
| Model Name | FDT140CSV-S5 |
| Dimensions (H x W x D) (mm) | 298 x 840 x 840 mm |
| Weight (Mass) (Kg) | 25 kg |
| Panel | |
| Panel Dimensions (mm) | 35 x 950 x 950 mm |
| Panel Net Weight (Kg) | 5 kg |
| Outdoor Unit | |
| Model Name | FDC140CSV-S5 |
| Dimensions (H x W x D) (mm) | 1300 x 970 x 370 mm |
| Weight (Mass) (Kg) | 106 kg |
Balance the indoor unit when installing
Check that the access doors have removable covers at each corner; a balanced arrangement of installing the indoor unit can make without removing the panel. As a result, serviceability is improved, and installation time is significantly reduced.
Easy to check the drain trough
Check quickly by removing the corner cap. Due to the new design, it is possible to check the condition of the water pump without removing the panel. In addition, locating the drain hole of the water trough is easy and convenient.
Drain pump 850 mm
The drain pump is pre-installed with a pipe lift of 850mm from the ceiling surface, allowing a free pipe layout. In addition, a 185mm soft tube, a standard accessory, an installation location facilitate easy installation.
The flaps can be controlled from high to low position independently by a wired controller. (This control system is also applicable to FDE ceiling type)
* The remote controller and the RCH-E3 are not applicable for independent vane control.
Specifications
