| General information | |
|---|---|
| Origin | Brand: Japan - Made in: Thailand |
| Gas | R410a |
| Type | Inverter - 2-way type (cooling / heating) |
| Cooling capacity | 2.0 Hp ~ 18.000 Btu/h - 5.1 kW |
| Heating capacity | 2.0 Hp - 5.4 kW |
| Using for rooms | Area 24 - 27 m² or 72 - 81 m³ (suitable for living room, office) |
| Power source (Ph/V/Hz) | 1 Phase, 220 - 240V, 50Hz |
| Electricity consumption | Cooling: 1.29 kW Heating: 1.31 kW |
| Refrigerant/ Liquid Pipe Diameter (mm) | 6 /12 |
| Maximum Pipe Length (m) | 30 m |
| Maximum Elevation Length (m) | 20 m |
| In door unit | |
| Model Name | FDT50VH |
| Dimensions (H x W x D) (mm) | 236 x 840 x 840 mm |
| Weight (Mass) (Kg) | 19 Kg |
| Panel | |
| Panel Dimensions (mm) | 35 x 950 x 950 mm |
| Panel Net Weight (Kg) | 5 Kg |
| Outdoor Unit | |
| Model Name | SCR50ZSX-S |
| Dimensions (H x W x D) (mm) | 640 x 800 x 290 mm |
| Weight (Mass) (Kg) | 45 Kg |
The Mitsubishi Heavy ceiling-mounted air conditioning FDT50VH Hyper Inverter (2.0Hp) has numerous advantages:
- Beautifully designed, in harmony with any interior space.
- Cooling capacity: 17,000 Btu - 5.0kW, suitable for installation in offices, shops, restaurants, cafeterias,...
- Airflow control panel with four blowers helps adjust the airflow to prevent cold or hot air from blowing directly on the person. Moreover, it is possible to change the airflow separately for each wing.
- A motion sensor fitted in the corner of the panel detects human activity in the room to improve comfort and save energy.
- Independent Flap control system: According to room conditions, the wind direction is independently controlled in 4-directions by a separate flap control system.
- Sleep mode: The room temperature is automatically controlled during the set time to ensure that it is not too cold or hot.
- Timer mode: The machine can start up earlier than the set time to help the room temperature reach the desired level when beginning to use (cooling mode).
- Drain Pump 850 mm from the ceiling surface, allowing a more accessible exhaust system layout.
- Defrost mode by microprocessor circuit: This mode helps self-defrost and minimizes excessive machine operation.
- Automatic fault reporting function when there is a problem: The microprocessor will automatically diagnose and report the error if the machine has a problem. (Please contact the service station for inspection and repair).
- Start button: Use the On/Off button (on the body of the indoor unit) when the remote controller cannot use.
Specifications
