| General information | |
|---|---|
| Origin | Brand : Japan - Manufacture of : Thailand |
| Gas | R-410A |
| Type | Inverter (save energy) |
| Cooling capacity | 3.0 Hp ~ 25.600 Btu/h |
| Heating capacity | 6.7 ( 1.0 ~ 7.1 ) kW |
| Using for rooms | Area 36 - 40 m² or 108 - 120 m³ (suitable for living room, office) |
| Power source (Ph/V/Hz) | 1 Phase 220 - 240 V 50Hz |
| Electricity consumption | 2.60 / 1.89 (kW) |
| Refrigerant/ Liquid Pipe Diameter (mm) | 6.35(1/4”) / 12.7(1/2”) |
| Maximum Pipe Length (m) | 30 m |
| Maximum Elevation Length (m) | 20/20 m |
| Energy Label | 5 stars |
| In door unit | |
| Dimensions (H x W x D) (mm) | 280 x 950 x 635 mm |
| Weight (Mass) (Kg) | 34 kg |
| Outdoor Unit | |
| Dimensions (H x W x D) (mm) | 640 x 800(+71) x 290 mm |
| Weight (Mass) (Kg) | 45 kg |
Slim design and completely hidden under the ceiling for a luxurious beauty
Mitsubishi Heavy duct connected inverter air conditioning FDUM60VF/SRC60ZSX-S (5.6kW) - Low/Middle Static pressure has a thin design. The height is only 280mm, this product has many advanced designs that bring the most comfort and convenience to users. Using the inverter system to save electricity, the inverter and the R410A Refrigerant line are environmentally safe.
High Efficiency cooling / heating capacity
A 2-way air conditioning with 5.6 kW cooling capacity and a 6.7 kW heating capacity for a room area of 31 - 35m2 for optimum performance is the Mitsubishi Heavy FDUM60VF Inverter.
Automatic External Static Pressure (E.S.P.) Control
Mitsubishi Heavy duct connected air conditioning FDUM60VF/SRC60ZSX-S inverter (2.5 Hp) - 5.6kW can set required E.S.P by E.S.P. button in the wired remote controller.
E.S.P button: External Static Pressure (E.S.P.) can be set by E.S.P. button
Powerful heating mode
New advanced technology of Mitsubishi Heavy has expanded the heating and cooling operation range. Allows the device to operate the heating system down to -20 ° C.
Energy-saving, quiet operation thanks to Hyper Inverter technology
Outdoor unit SRC60ZSX-S is an Inverter new advanced technology with high efficiency, powerful heating operation mode, and the ability to connect long pipes. Contribute to environmental protection through energy saving. Allows the installation of devices (4 ~ 6HP) that can operate under ambient temperatures down to -20oC, with a flexible design. Performance improved for pipe lengths up to 100m.
Piping length - 100m
Refrigerant precharged piping length extending to 30m
Refrigerant precharged piping length extends up to 30m. This eliminates the need to add refrigerant on site, which sets it free from trouble of excessive or insufficient charging of refrigerant, and allows carrying out the installation smoothly.
* Hyper inverter 1.5~2.5HP and Standard Inverter are up to 15m.
Monitoring Function
To your PC monitoring and service tasks made simple with our service software (“Mente PC”).
Improvement of the Serviceability
Fan unit (impeller and motor) can be pulled out from the right side of the unit. Maintenance can be carried out from the right side or the bottom side of the unit.
Enhanced Installation Workability
600mm Drain Pump is mounted in all models. The indoor unit is completely hidden in the ceiling, so this is suitable for spaces with classy interior decoration.
Transparent Inspection Window
Dirt condition of the bottom of a drain pan can be checked through this transparent inspection window without removing drain pan.
Specifications
Powerful-Hi mode selected
Noise level: 40 / 50ZSXVF 37dB (A), 60ZSXVF 36dB (A), 71VNXVF1 38dB (A), 100VN (S) XVF2 44dB (A), 125VN (S) XVF 45dB (A), 140VN (S) XVF 47dB ( A)
Air flow: 40 / 50ZSXVF 13m3 / min, 60ZSXVF 20mm3 / min, 71VNXVF1 24m3 / min, 100VN (S) XVF2 36m3 / min, 125VN (S) XVF 39m3 / min, 140VN (S) XVF 48m3 / min.
Note:
Parameters measured under conditions (IOS-T1)
Cooling: Room temperature 27˚CDB, 19˚CWB, and outdoor temperature. By 35˚CDB. Heating: Room temperature 20˚CDB and outdoor temp 7˚CDB, 6˚CWB.
* Index obtained in the laboratory. During operation, these readings will vary more due to surrounding environmental conditions
** Static pressure changed by setting on the controller. The maximum static pressure does set to "High Static Pressure". The noise value will be higher than 5dB (A) when the static pressure level is outside 200Pa
*** If a cooling operation can conduct when the outdoor temperature is -5oC or below, the outdoor unit must install in a place that is not affected by natural wind. If the wind blows, the low pressure will slip off, and the compressor frequency will increase, which reduces the capacity and can lead to damage.
