General information | |
---|---|
Origin | Brand : Vietnam - Made in : Vietnam |
Gas | R410A |
Type | Mono - 1-way type (cooling only) |
Cooling capacity | 2.0 Hp - 18.000 Btu/h |
Using for rooms | Area 24 - 27 m² or 72 - 81 m³ (suitable for living room, office) |
Power source (Ph/V/Hz) | 1 phase, 220 - 240V, 50Hz |
Electricity consumption | 2,0 Kw |
Refrigerant/ Liquid Pipe Diameter (mm) | 6.4 / 12.7 |
In door unit | |
Model Name | RGT18 |
Dimensions (H x W x D) (mm) | 230 x 840 x 840 (mm) |
Weight (Mass) (Kg) | 24 (kg) |
Panel | |
Panel Dimensions (mm) | 35 x 950 x 950 (mm) |
Panel Net Weight (Kg) | 6 (kg) |
Outdoor Unit | |
Model Name | RC18 |
Dimensions (H x W x D) (mm) | 590 x 760 x 285 (mm) |
Weight (Mass) (Kg) | 39 (kg) |
Uniform square panel
All models use the same panel size. Although many devices are installed, they still ensure uniformity in form and harmony in aesthetics. It makes it easier to arrange ceiling lighting and design furniture.
Compact design and quiet operation
Indoor units using turbine fans have diffusers designed according to aerodynamics. Wind resistance has been reduced by combining a propeller and diffuser to regulate airflow inside the team. The turbine fan has a quiet diffuser and is designed to be lightweight.
Multi-flow blowing system
A mouth guard (optional) must use to close new exits when setting two-way or three-way blowing.
Self-adjusting blowing direction
The last blowing direction is stored in memory. When the device is turned on the next time, the memory automatically selects the blowing mode stored in it. (At the factory, the wind direction angle is set to default 65 degrees for heating mode and 35 degrees for cooling mode.) This position can be changed using the remote control.
You can choose to blow direction when installing
It is possible to choose the blowing direction for the machine after installation because the multi-flow blowing system is convenient. However, using two or three blowers may increase the operating noise of the unit.
Widely dispersed air
A new type of air dispersion allows increased airflow without increasing wind speed. Can disperse the air further than before.
Install on high ceilings
The machine can use easily installed in any position with a ceiling height of up to 2.7m-3m.
An air conditioner cools faster
The air conditioner has a fast cooling feature that makes the room temperature about 1.5 times faster than other standard air conditioners.
Easy to install and maintain
You will easily install the outdoor unit on the balcony or in hidden places and install the indoor unit in any position in the house with the refrigerant pipe up to 30m in length.
Basic features of the Reetech ceiling mounted air conditioning RGT18/RC18
- Three fan speeds with auto-adjust function.
- Automatic air swing.
- Resistant to corrosive agents and resistant to marine environments.
- Manually select the operating mode.
- The mask is easy to disassemble for cleaning.
- Purify the air.
- Self-diagnosis and automatic protection function.
- Remote control.
- Hours of operation.
- Auto-start when power is restored.