| General information | |
|---|---|
| Origin | Brand : Vietnam - Made in : Vietnam |
| Gas | R410A |
| Type | Mono - 1-way type (cooling only) |
| Cooling capacity | 4.0 Hp (4.0 Ngựa) - 36.000 Btu/h |
| Using for rooms | Area 50 - 54 m² or 150 - 162 m³ (suitable for living room, office) |
| Power source (Ph/V/Hz) | 1 phase, 220 - 240V, 50Hz |
| Electricity consumption | 4,0 Kw |
| Refrigerant/ Liquid Pipe Diameter (mm) | 9.5 / 19.1 |
| In door unit | |
| Dimensions (H x W x D) (mm) | 300 x 840 x 840 (mm) |
| Weight (Mass) (Kg) | 30 (kg) |
| Panel | |
| Panel Dimensions (mm) | 55 x 950 x 950 (mm) |
| Panel Net Weight (Kg) | 6 (kg) |
| Outdoor Unit | |
| Dimensions (H x W x D) (mm) | 860 x 895 x 315 (mm) |
| Weight (Mass) (Kg) | 80 (kg) |
REETECH CEILING MOUNTED AIR CONDITIONING RGT36/RC36 OPTIMIZED COOLING SOLUTION
Reetech ceiling mounted air conditioning RGT36/RC36 (4.0Hp) distributes wind evenly throughout the space to be cooled like Toshiba ceiling air conditioner. Easily adjust the flow of fresh and comfortable air thanks to the powerful multi-directional blowing system that helps regulate the airflow out of the machine in the optimal flow and spread so that cool air can reach the farthest corners of the room.
SPECIAL FEATURES
- Three fan speeds with auto-adjust function.
- Automatic air swing.
- Resistant to corrosive agents and resistant to marine environments.
- Manually select the operating mode.
- The mask is easy to disassemble for cleaning.
- Purify the air.
- Self-diagnosis and automatic protection function.
- Remote control.
- Hours of operation.
- Auto-start when power is restored.
DETAILS ABOUT OUTSTANDING FEATURES
Uniform square panel
All models use the same panel size. Although many devices are installed, they still ensure the uniformity of form and aesthetic harmony similar to 2.0Hp wall-mounted air conditioners. It is easier to arrange ceiling lighting and design furniture.
Compact design and quiet operation
Indoor units using turbine fans have diffusers designed according to aerodynamics. Wind resistance has been reduced by combining a propeller and diffuser to regulate airflow inside the unit. The turbine fan has a quiet diffuser and is designed to be lightweight.
Multi-flow blowing system
When setting two-way or three-way blowing, a mouth guard (optional) must use to close new exits.
Self-adjusting blowing direction
The last blowing direction is stored in memory. When the device is turned on the next time, the memory automatically selects the blowing mode stored in it. (At the factory, the wind angle is set to 65° for heating by default and 35° for cooling.) This position can be changed using the remote control.
Can choose to blow direction when installing
Like with the 2.0Hp wall-mounted air conditioner, you can choose the direction of blowing for the machine after installation because the multi-flow blowing system is convenient. However, using two or three blowers may increase the operating noise of the unit.
Widely dispersed air
A new type of air dispersion allows increased airflow without increasing wind speed. Can disperse the air further than before.
It can install on high ceilings
The machine can easily install in any position with a ceiling height of up to 2.7m-3m.
An air conditioner cools faster
The air conditioner has a fast cooling feature that makes the room temperature about 1.5 times faster than other standard air conditioners.
